Gypsum filler for grouting plasterboard joints and thin-layer levelling of mineral substrates
Suitable as finishing compound for fire-rated partitions (Q2, Q3,Q4)
Perfect surface smoothness
Excellent adhesion
Suitable for increased humidity rooms (bathrooms, kitchens)
Low shrinkage during setting
High resistance to cracking
Type
B2/20/2 zgodnie z EN 13279-1:2008
Reaction-to-fire performance
A1 – completely non-combustible
Working time
60 minutes
Water consumption
11 l / 25 kg
Permissible thickness
0-10 mm for one-layer application
Application temperature
+5 to +25°C
Consumption
0,10 kg/m2 – grouting of Norgips plasterboard joints
1,0 kg/mm/m2 – full-surface levelling
Shelf life
12 months
Packaging
Bag 25 kg (48 pcs per pallet)
SUBSTRATE PREPARATION
The substrate should be dry and in sound condition and free of dirt, dust and loose particles.
Plasterboard surfaces do not require priming. Reinforce absorbent mineral substrates with a deep penetrating primer and smooth concrete surfaces with a primer improving their adhesiveness.
COMPOUND PREPARATION
Pour the joint compound gradually into a vessel filled with clean water in a ratio of 11 litres of water per 25 kg of dry mix; then mix manually or with a low-speed mixer untila homogeneous consistency is reached. After mixing with water, the compound should be used within 60 minutes.
COMPOUND APPLICATION
The Norgips gypsum filler is intended for manual application. Lay the prepared compound with appropriate trowels or floats made of stainless materials, in layers that are not thicker than 10 mm. After drying, sand the surface manually or mechanically, using sandpaper or abrasive mesh with a grit size of P180 to P240.
ADDITIONAL INFORMATION
VIDEO tutorials
Find out how to properly install plasterboard in a difficult loft, build a partition wall, suspended ceiling or a dry screed. Check out our VIDEO tutorials, as well as product tests and expert recommendations.
Practical tips
Here you will find practical advice and information about Norgips products and their applications, as well as how to make non-standard elements using plasterboard. We will help you get the job done quickly and efficiently.
There are four specified and defined levels for jointing plasterboard surfaces Q1, Q2, Q3 and Q4. The appropriate level of jointing is selected according to the investor's requirements concerning the quality (degree of smoothness) of the surface, th…
News
Find out about current events and new products from Norgips
The first two-day nursery organised by the Finishing Works Group took place at the Bricoman Lublin warehouse on 20 and 21 June. Our stand showcased the NORGIPS product range, such as:
On 14 May, we had the pleasure of taking part in another School organised by the Finishing Work…
The document folder is where you can store selected downloads and material consumption calculat…
How to make a partition wall correctly? What products should be used in loft? How much does the plasterboard weigh? Our technical advisors can answer these and your other questions.
A selection of downloads and material consumption calculations from our website can be included in the document folder.
Click'To folder' on any document or calculation.
With the document folder you can easily prepare documentation for your investment including:
